Large aluminium sliding window with thermal break frame in a modern villa facade
Windows

Thermal break aluminium windows, built to your schedule.

Casement, tilt and turn, awning, sliding and fixed systems from 86 mm to 120 mm series, manufactured to project drawings and certified for North American, Australian and European compliance.

Overview

One profile system is not enough for every climate

A window that performs in Dubai does not automatically perform in Melbourne or Toronto. Wind load, driving rain, solar gain and acoustic requirements all point to different profile depths, glass build-ups and opening types. We build five window families so the specification can follow the climate instead of the catalogue.

  • Thermal break profiles with polyamide isolation bars, cut and assembled in-house
  • Glass controlled in-house: double or triple glazed, tempered, laminated, Low-E, argon filled
  • Tested values published: U-factor from 0.19 Btu/hr·ft²·°F on fixed frames
  • Complete packages: frames, sashes, glass, hardware, screens and accessories from one factory
  • Project support: shop drawings, glass schedule and certification documents for approvals
White thermal break aluminium casement window with double glazed units
01 — Casement

Outward opening casement windows

The workhorse of residential and hotel projects. Outward opening sashes give a full clear opening, seal tightly on compression gaskets, and suit everything from apartment bedrooms to villa facades.

SeriesEB-86 · EB-112 thermal break
OpeningOutward casement, top hung, side hung, fixed combination
Tested performanceU 0.39 (86 mm) / 0.30 (112 mm) Btu/hr·ft²·°F · air leakage 0.03 / 0.11 cfm/ft²
CertificationNFRC CPD EBO-C-1 and EBO-C-3 · CSA 80250569
Typical useVillas, apartments, hotels, schools
Inward opening aluminium window with tilt and turn hardware
02 — Inward opening

Tilt and turn windows

Two functions in one sash: tilt for ventilation without a draught, turn for full opening and cleaning access from inside. Preferred in Europe and in high-rise buildings where outward opening is restricted.

SeriesEB-100 thermal break
OpeningTilt and turn, inward casement, fixed combination
Tested performanceU 0.21 Btu/hr·ft²·°F · air leakage 0.06 cfm/ft²
CertificationNFRC CPD EBO-C-5
Typical useApartments, offices, European residential projects
Two panel aluminium sliding window with slim frame in a coastal villa
03 — Sliding

Sliding and lift-slide windows

For wide openings where a hinged sash would be impractical. Side-press sliding gives strong water performance in exposed locations; lift-slide carries very large panels with a light pull and a tight seal when closed.

SeriesEB-120 side-press · 120 series lift-slide
Profile6063-T5 aluminium, 1.6 mm wall, 120 mm frame width
Standard glazing5 + 20A + 5 mm double glazed unit
Sash weightUp to 60 kg per sash
Performance classLC-PG40 · design pressure 1920 Pa · water 720 Pa · wind resistance level 7 · air and water level 4
U-value / acoustics2.5–3.0 W/(m²·K) · 30–35 dB sound reduction
CertificationCSA Group 80250569 (2200 × 2100 mm test specimen)
Typical useBalconies, terraces, sea-facing facades
Fixed floor to ceiling glazing with aluminium frames in a garden room
04 — Fixed & structural

Fixed frames, sunrooms and curtain wall

Fixed glazing delivers the best thermal and acoustic numbers in the range, and it is where large spans become possible. We engineer fixed frames for wind load, and combine them with operable sashes in the same elevation.

SeriesEB-112 fixed · sunroom · curtain wall
Tested performanceU 0.19 Btu/hr·ft²·°F · air leakage 0.01 cfm/ft²
CertificationNFRC CPD EBO-C-4
Typical useSunrooms, stairwells, commercial facades
Specification options

What we need from you, and what you can choose

GLASS

Build-up

Single, double or triple glazed; tempered or laminated; Low-E coating on face 2 or 3; argon filling at 94% or above; tinted or reflective options for high solar gain.

PROFILE

Finish and colour

Powder coated, anodised or wood grain finish. Standard RAL colours plus project-specific colours; sand grey and matt black are common for export orders.

HARDWARE

Operation and security

German or Chinese branded friction stays, handles, multipoint locks and hinges. Fly screens, blinds and restrictors can be factory fitted.

To quote accurately we need: window schedule or drawings, sizes and quantities, opening type per item, glass requirement, finish colour, destination port. Without a schedule we can only give indicative square-metre rates.

Send a window schedule, get a line-by-line quotation.

DWG, PDF and Excel schedules accepted. Reply within one working day.

Request a quotation